ISO 24521:2025

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٨ مايو ٢٠٢٥

Drinking water, wastewater and stormwater systems and services — Management of on-site domestic wastewater services

ملفات الوثيقة ISO 24521:2025

الإنجليزية 38 صفحات
الإصدار الحالي
USD 219.37

مجال الوثيقة ISO 24521:2025

This document provides guidance and requirements for the management of on-site domestic wastewater systems and services, using appropriate technologies in their entirety at any level of development.

This document supplements and is intended to be used in conjunction with ISO 24511 and ISO 24525. It includes guidance and requirements for the following:

—     management of on-site domestic wastewater systems and services from the operator’s perspective, including maintenance techniques, training of personnel and risk considerations;

—     management of on-site domestic wastewater systems (ODWS) from the perspective of owners and users;

—     design and construction of ODWS;

—     planning, operation and maintenance, and health and safety issues.

This document is applicable to both publicly and privately operated on-site domestic wastewater (black and grey water) services, for one or more dwellings. In rural areas and areas under development, management is sometimes provided by the owners of the premises where wastewater is generated. In this document the term “services” includes “self-services” provided by the owners of the premises.

The following are outside the scope of this document:

—     limits of effluent quality for wastewater discharged into the environment;

—     analytical methods;

—     stormwater runoff;

—     content of contracts or subcontracts.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
مواصفة قياسية يمنية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 20816-3:2026
 
مواصفة قياسية دولية
Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machines with operating speeds between 120 r/min and 30 000 r/min
ISO 20816-1:2026
 
مواصفة قياسية دولية
Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
ISO 23375:2026
 
مواصفة قياسية دولية
Intelligent transport systems — Collision evasive lateral manoeuvre systems (CELM) — Requirements and test procedures
ISO 18722-2:2026
 
مواصفة قياسية دولية
Tobacco heating systems — Determination of aerosol collected mass and nicotine in the aerosol with a puffing regime according to the ISO 5501 series — Part 2: Aerosol heated tobacco products (aHTPs)